96 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
Alert messages
Alert messages selection is only visible/possible if this function is enabled in
Call station, page
59
.
1. Click the + of the Alert messages row.
2. Select the call definition:
– Note: Do not select call definition with Live speech set to "Yes".
3. Select (add/remove) the zone/zone group with the > < buttons.
4. Click the Submit button to store the settings. See also
Save configuration, page 102
.
Refer to
– Action definitions, page 84
– Zone definitions, page 75
To Next Page
Loading...
