Solution 6000
Installation Manual Comms Programming
9-13
Bosch Security Systems 07/14 BLCC610I
Comms > Remote Access >
CLI Numbers
MENU 5-3-7
First
Number
1 Digits 32
Second
Number
1 Digits 32
Third
Number
1 Digits 32
CLI Numbers (Call Line Identification) allows the control
panel to answer an incoming call only when the control
panel identifies that the incoming call is from any one of
the three CLI numbers programmed. Up to three different
CLI telephone numbers can be programmed, each having
a maximum of 32 digits.
1) Enter [MENU] + [5] + [3] + [7]. The keypad will
display the following:
Phone 1=
Phone 2=
Phone 3=
Press OK or MENU
2) Highlight the telephone number that you want to
program for CLI number, then press [OK] to select.
CLI Numbers Phone 1
Press 0-9 OK to SAVE
3) Using the numeric keys, enter the telephone
number that you wish to program.
4) Press [OK] to save and return to the MENU.
Up to 3 Phone numbers can be entered for CLI Call
Line Identification for remote access detection. You
must enter STD code plus the compete number for
this option to work. Press [OK] after each telephone
number is entered to save and move to the next
number.
The control panel is only required to match part
of the CLI telephone number programmed to the
number of the incoming call.
Example
If the programmed CLI telephone number is
0296721777, the control panel would only be
required to match part of the telephone number (eg.
96721777) to answer the incoming call.
Comms > Remote Access >
User RAS PIN
MENU 5-3-8
0 0 0 0 0 0 0 0
Use keys 0 - 9 to program user RAS PIN + [OK] tosave.
1) Press [MENU] + [5] + [3] + [8]. The keypad will
display the current Transmission Format for
Destination 2.
User RAS PIN
00000000
Press 0-9 OK to SAVE
2) Use the numeric keys to program the user RAS PIN
required, then press [OK] to save and exit, or press
[MENU] to exit without saving.
To Next Page
Loading...
Need help?
General
