Bosch SOLUTION 6000 Installation Guide

Solution 6000  Installation Manual  Specifications
13-2
Bosch Security Systems 07/14 BLCC610I
♦ CM729B - Biometric Fingerprint Reader (White)
♦ CM743B - GSM/GPRS 2G Plug On Module
♦ CM744B - GSM/GPRS 3G Plug On Module
♦ CM751B - TCP/IP Interface Module
♦ CM760B - Real Time Clock Module
♦ CM797B - LAN Isolator Module
♦ CM796B - Wiegand to RS485 LAN Interface Module
♦ CM723B - LAN 5 Amp P/S Module/Dual Battery Chargers
Accessories
♦ SW500B - SolutionLink Software
♦ SW501B - Site Manager Onsite Administration Software
♦ CM900 - Direct Link Cable
♦ CM901 - Flash Upgrade Cable
♦ CM255 - Default Key
The following parts are supplied with the panel
(Australian models only - content may differ in export models )
Panel Assembly Includes 1 x Metal Enclosure with tamper
1 x Panel PWA
1 x User Manual
1 x Installer Reference Guide
1 x Resistor Pack
Resistor Pack Includes 1 x Red Battery Lead
1 x Black Battery Lead
1 x 2-Way Shunt With Handle
2 x Phillips Pan Head Zinc Plate Screw
1 x Telephone Cable RJ12 6P/4C
10 x 3K3 – 0.25W +/- 1% Metal Film Resistors
10 x 6K8 – 0.25W +/- 1% Metal Film Resistors
1 x 3-Way AC Terminal Block
1 x Panel Tamper Switch
1 x Tamper Switch Bracket

Bosch SOLUTION 6000 Specifications

General

Partitions	8
System Type	Hybrid wired/wireless security system
Keypads	Up to 16
Communication	PSTN, optional IP module, optional GSM/GPRS module
Arming Modes	Stay, Away
Power Supply	16.5VAC
Backup Battery	12V 7Ah
Operating Temperature	0°C to +50°C