Do you have a question about the BÖWE P414 and is the answer not in the manual?
Detailed breakdown of the machine's internal layout and components.
Key specifications including dimensions, capacity, and power requirements.
Information on the usage of steam, electricity, water, and air per cycle.
Overview of the available cleaning programmes and their selection.
Step-by-step description of the various stages within cleaning cycles.
Important advice and tips for effective and safe machine operation.
Description of the single/multi-charge precoat filter system.
Explanation of the two-part filter housing with paper cartridges.
Details on the maintenance-free refrigeration system for drying.
Information on the integrated small electrical steam generator.
Description of the DG 18 dosing unit and Mini-Spraymatic.
Overview of other machine components like programme timers.
Step-by-step instructions for initial machine setup and filling.
Recommended settings for various machine parameters.
General procedures for operating the machine in automatic and manual modes.
Daily, weekly, and monthly maintenance tasks.
Key areas requiring regular checks and cleaning.
Procedure for cleaning and checking the lint filter.
Instructions for draining and precoating the expander filter.
Procedures for filter draining and cartridge replacement.
Guidelines for cleaning and maintaining the distillation unit.
Instructions for draining, cleaning, and refilling the water separator.
Identification of lubrication points and frequency.
Procedure for cleaning strainers in water and steam systems.
Maintenance for the compressed air system components.
Inspection and cleaning of the air cooler.
Checks and cleaning for solvent lines and tanks.
Procedures for monitoring and maintaining solvent quality.
Schematic representation of the machine's fluid and gas lines.
Explanation of the various symbols used in the manual's diagrams.
Schematic of the machine's pneumatic control system.
Details on the mandated opening for emissions measurement.