Brady BMP 41 - Firmware Upgrades

Introduction
Firmware Upgrades
4
BMP
®
41 User’s Manual
*Exposing the BMP
®
41 Label Printer to direct sunlight is not recommended.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not attempt to use batteries other than those recommended in this manual.
Firmware Upgrades
Future upgrades to BMP
®
41 Label Printer firmware can be downloaded from Brady’s website.
Access
www.bradyid.com/BMP41, click Support>Downloads, then select BMP
®
41 Label
Printer from the list of products.
Environmental Operation Storage
Temperature* (Printer) 4° to 43° C (40° to 110° F)
Be mindful, when using the
AC adapter with the printer,
that the AC adapter is rated
at a maximum temperature
of 30° C (86° F).
-18° to 43° C (0° to 110° F)
Relative Humidity
(Printer)
20% to 90% (non-
condensing)
10% to 90% (non-
condensing