Brady BMP 41 - Font Attributes

41
Formatting
Font
BMP
®
41 User’s Manual
Shortcut
You can increase or decrease the size of the font, one point at a time using the navigation keys:
1. Hold the [Shift] key and press the Up/Down navigation keys enough times to reach the
desired font size.
Font Attributes
Font attributes (bold, italics, underline) can be applied to individual characters in a line of text.
To turn an attribute on:
1. Position the cursor where the attribute should take affect.
2. Press Font .
3. Choose the desired attribute, then choose ON.
4. Press Enter .
5. Enter the text to be affected by the attribute.
The attribute stays on until it is turned off, or until you move to a new area.
To turn the attribute off:
1. Press Font .
2. Choose the attribute, then choose OFF.
3. Press Enter .