Brady BMP 41 - AC Power Adapter Usage; Attaching the AC Adapter

9
Power Source
AC Power Adapter
BMP
®
41 User’s Manual
AC Power Adapter
The printer can be powered through an AC/DC power adapter. If the battery pack is installed
when using the power adapter, the battery will charge.
Use only the 18 VDC, 3.3A, Brady AC/DC adapters, shown below, for supplying power
to the BMP
®
41 Label Printer.
Brady AC Adapters
Attaching the Adapter
The printer can be powered through a designated AC power adapter. When the adapter is
plugged in, it will also charge the BMP41-BP NiMH battery pack if one is inserted in the
battery compartment.
Catalog Number Region
M50-AC North America,
Australia
M50-AC-INTL Europe
M50-AC-AR Argentina
M50-AC-BR Brazil
1. Insert the round end of the adapter cable
into the plug-in port on the back of the
printer.
2. Plug the other end of the cord into an
electrical outlet.