65
Serialization
Examples of Serialization
BMP
®
41 User’s Manual
In a multi-sequence “linked” serialization (i.e., Linked box checked), the second set of values
is dependent on the first set. The second sequence holds its initial value until the first sequence
completes, after which it moves to the next value.
Multiple linked serialization:
Numbers in Sequences
Single digit numbers are “padded” with zeros (0), which you can display if desired. To display
zeros, enter a zero before single-digit numbers (e.g., 01, 02, 03…). If the 0 is not entered, it
becomes a virtual 0 acting as a placeholder, allowing for better alignment of numbers/letters.
Figure 26 • Displayed vs. virtual zeros in sequences
Sequence #1 Sequence #2
Start Value: 1 Start Value: A
End Value: 10 End Value: C
Increment: 1 Increment: 1
Produces: 1A..10A, 1B..10B, 1C..10C
To Next Page
Loading...
