54
2. An editor screen was open for programming but no values were confirmed or values
were entered but no line is inserted in pump.
An acoustic tone sounds in 20 seconds, the display states “Value not confirmed“,
the yellow LED is constantly on and a staff call is activated (optional).
Confirm alarm with K and continue to program infusion.
Sample reminder alarms include:
Display message Alarm reason
“Bolus NOT running“ BOL was not pressed after programming bolus dose
and time.
“Order still pending” Autoprogramming order was sent to pump but not
confirmed.
3.4 Alarm Prompts
A prompt provides direction to assist in properly operating the pump. (e.g. “Bolus func-
tion disabled”, “Download failed”, or “The parameter can not be modified”).
ALARMS
Chapter 3
To Next Page
Loading...
