64
SSID: The Service Set Identifier, is a
the service tool HiBaSeD.
wireless LAN. The SSID can be up to 32
characters long and can only be set with
IP-Address shows the assigned IP address of the infusion pump.
Signal strength: The signal strength shows
the quality of the connection.
Baud rate is the maximum communication speed in mega bits per second (Mbps). The
maximum baud rate strongly depends on the w
ireless standard (802.11 a/b/g/n).
Status code displays the current status of the wireless connection. If there is a problem
with the wireless connection an error code is displayed. Error codes can be:
10 to 12: internal malfunction
13: wireless interface does not find any network
14: wireless interface is trying to connect to a network
15: the interface is being configured
16: the interface is waiti
ng for authentication
17: DHCP request is sent out
19: internal failure
Available Networks opens a sub menu showing the available wireless networks (SSID)
and their signal strength. It is not possible to change to another network. The Space
pump always connects to the network with the highest signal strength.
Within the Options menu the wireless mode
can be switched on or off.
6.4 Battery maintenance
To accurately balance the battery capacity a cyclical battery maintenance is
necessary. The pump asks the user to perform a battery maintenance every 30
days when the feature is enabled in the service program. The battery mainte-
nance mode detects a possible capacity loss (e.g. through aging of the battery
pack) and then the capacity/running time will be recalculated. After a longer
BATTERY OPERATION AND MAINTENANCE
Chapter 6
To Next Page
Loading...
