Brother GTX-4 - Page 278

6-87
Disassembly / Replacement / Adjustment
(18) Detach the tube from the tube clamp.
(19) Disconnect the solenoid connector connected to the circuit board.
(20) Detach the sub tank from the valve base.
<IMPORTANT>
 As this unit is kept to be hooked on the screws in Step 16, pull it up once to detach from under the valve base.
Pull out from under the valve base.
19
K Y C M W1 W2 W3 W4 W4 W3 W2 W1