Brother GTX-4 - 10-2. Software

6-125
Disassembly / Replacement / Adjustment
(7) Place the cartridge on a flat surface. Push the latches and remove the wind-up shaft from the left and right gear
pressure plates. Then detach the wind-up spring from the rear of the cartridge.
(8) Detach the wind-up spring from the wind-up shaft.
Wind-up shaft
Wind-up spring
Wind-up spring
Gear pressure plate
Wind-up shaft
Stepped
portions of the
sto
pp
er
Side view
Lid
Cardboards
or the like
Warp