3-43
Confidential
(5) Remove the taptite cup S M3x8 SR screw to remove the motor plate calking ASSY and
the drum idle gear 68R from the motor drive sub ASSY.
(6) Remove the three screw bind M3x4 screws, and remove the main motor from the motor
plate calking ASSY.
Fig. 3-45
Fig. 3-46
Assembling Note:
• When assembling the motor plate calking ASSY, set the drum idle gear 68R and the
develop gear 65L/34 to the motor plate calking ASSY as shown in the figure below, and
then attach it to the motor drive sub ASSY.
Motor drive sub ASSY
Taptite cup S M3x8 SR
Drum idle gear 68R
Motor plate calking ASSY
Screw bind M3x4
Main motor
Motor drive sub ASSY
Develop gear 65L/34
Drum idle gear 68R
Motor plate calking ASSY
To Next Page
Loading...
Need help?
General
