What to do if my Brother MFC-8220 shows 'Out of Memory'?
If your Brother All in One Printer displays 'Out of Memory', during fax sending or copy operation, press Stop/Exit and wait until the other operations in progress finish and then try again. You can also clear the data in the memory. If you are printing, reduce print resolution or clear the data in the memory. You can also add an optional memory board.
What does 'Change Drum Soon' mean on my Brother MFC-8220 All in One Printer?
If your Brother All in One Printer displays 'Change Drum Soon', it indicates that the drum unit is near the end of its life. Continue using it until you notice a decline in print quality, then replace it with a new one. If the message persists after replacement, open the front cover, press Clear/Back, and then press 1 to reset the counter.
What to do if my Brother All in One Printer says 'Toner Empty'?
If your Brother All in One Printer displays 'Toner Empty', it means either the toner cartridge isn't installed or the toner is used up, and printing is not possible. To resolve this, reinstall the toner cartridge or replace it with a new one.
What to do if my Brother MFC-8220 says 'Check Paper'?
If your Brother All in One Printer displays 'Check Paper' messages, it means the printer is either out of paper or the paper isn't loaded correctly in the tray. To fix this, refill the paper in the tray or remove the paper and load it again properly.
What to do if my Brother MFC-8220 says 'Check Paper Check Paper #1 Check Paper #2'?
If your Brother All in One Printer displays 'Check Paper Check Paper #1 Check Paper #2', refill the paper in the paper tray, or remove the paper and load it again. It means that the printer is out of paper, the paper is not properly loaded, or the paper is jammed.
How to clear 'Change Drum Soon' message on Brother All in One Printer?
If your Brother All in One Printer displays 'Change Drum Soon', it means the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace it. If the message persists after replacement, open the front cover and press Clear/Back, then press 1 to reset the counter.
How to fix 'Toner Empty' error on Brother MFC-8220 All in One Printer?
If your Brother All in One Printer shows 'Toner Empty', reinstall the toner cartridge or replace it with a new one because the toner cartridge is either not installed or the toner is used up and printing is not possible.
General| Type | all in one |
|---|---|
| Tray Capacity | 250 |
| Automatic Document Feeder Capacity | 30 sheets |
| Paper Size | letter, legal, a4, b5, a5, b6, a6, exe |
| Paper Handling | up to 250 sheets |
| Mono Print Speed | 21 pages per minute |
| Print Resolution Mono | up to 2400 x 600 |
| Maximum Number of Pages Per Month | up to 20, 000 |
| Scanner Type | sheetfed |
| Scan Resolution | up to 300 x 600 |
| Copier Resolution Mono | up to 600 |
| Fax Function | yes |
| Cartridges | n/a |
| Number Of Cartridges | 2 |
| Internal Memory | yes |
| Network | not applicable |
| Connectivity | parallel, usb 2.0 |
| OS Compatibility | pc: windows 95, 98, 98se, me, nt workstation 4.0, 2000 professional or xp, mac: os 8.6 to 9.2, os x 10.1, 10.2.1 to 10.3 or later, available usb 2.0 or parallel port |
| Mobile Devices Connection | no |
Weight and Dimensions| Height | 13.2 inches |
|---|---|
| Width | 17 inches |
| Net Weight | 25.6 pounds |
To Next Page
