App. 1-22
Confidential
<WSW16> (Function setting 1)
• Selector 2: ITU-T (CCITT) superfine recommendation
If this selector is set to "1," the machine communicates in ITU-T (CCITT) recommended
superfine mode (15.4 lines/mm). If it is set to "0," it communicates in native superfine
mode.
• Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
• Selector 8: [Stop/Exit] button pressed during reception
If this selector is set to "1," pressing the [Stop/Exit] button can stop the current receiving
operation. The received data will be lost.
<WSW17> (Function setting 2)
• Selector 5: Calendar clock type
If this selector is set to "0" (USA), the MM/DD/YY hh:mm format applies; if it is set to "1"
(Europe), the DD/MM/YY hh:mm format applies: DD is the day, MM is the month, YY is the
last two digits of the year, hh is the hour, and mm is the minute.
• Selector 7: Non-ring reception
Setting this selector to "1" makes the machine receive calls without ringer sound if the
number of calling is set to 0.
Selector No. Function Setting and Specifications
1 Not used.
2
ITU-T (CCITT) superfine
recommendation
0: OFF 1: ON
3
I
6
Not used.
7 Max. document length limitation 0: 400 cm 1: 90 cm
8
[Stop/Exit] button pressed
during reception
0: Not functional 1: Functional
Selector No. Function Setting and Specifications
1
2
Off-hook alarm
(Not used.)
3
4
Not used.
5 Calendar clock type 0: U.S.A. type 1: European type
6 Not used.
7 Non-ring reception 0: OFF 1: ON
8 Not used.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
