Confidential
2-15
(16) Disconnect the four Connectors (CN3, CN7, CN10, CN19) from the Main PCB ASSY.
(CN3, CN7: MFC-9440CN/ 9450CDN only)
Fig. 2-20
(17) Remove the cup S M3x8 Taptite screw from the Joint sub cover.
(18) Release the two Hooks to remove the Joint sub cover from the Joint cover ASSY.
Fig. 2-21
Main PCB ASSY
CN10
CN19
Taptite, cup S M3x8
Hooks
Joint cover ASSY
Joint sub cover
CN7
Speaker holder
Joint cover ASSY
CN3
<Left side>
To Next Page
Loading...
