Confidential
3-91
8.24 Paper Feed Frame Unit/ T1 PE/Edge Sensor PCB ASSY
(1) Disconnect the three connectors (CN1, CN10, CN11) from Engine PCB ASSY.
CN1
CN10
CN11
Fig. 3-112
(2) Close the Front door unit ASSY. Remove the cup S M3x6 Taptite screw and two bind B
M3x10 Taptite screws.
(3) Open the Front door unit ASSY. Slide the Paper feed frame unit in the direction of arrows 3a
and 3b in this order and remove it.
Fig. 3-113
Paper feed frame unit
Taptite, cup S M3x6
Taptite, bind B M3X10
Taptite, bind B M3X10
Engine PCB ASSY
3a
3b
<Front>
To Next Page
Loading...
