Brother MFC-9440CN - Joint Cover ASSY

Confidential
3-81
8.22 Joint Cover ASSY
(1) Release the Hook (1a) to remove the Battery from the Joint cover ASSY.
(2) Disconnect the connector from the Battery.
Caution:
- There is danger of explosion if the battery is incorrectly replaced.
- Do not disassemble or recharge the battery.
- Do not dispose of the battery in fire.
- Used batteries should be disposed according to the local regulations.
Fig. 3-93
(3) Remove the Pull arm stopper. Then, remove the Pull arm guides L and R from the Joint
cover ASSY.
Fig. 3-94
Hook
Battery
Joint cover ASSY
1a
1b
2
Pull arm guide
Pull arm stopper
Hook
Joint cover ASSY
Connector