Brother MFC-9440CN - Entering Text

Confidential
3-80
(4) Remove the Screw pan (S/P washer) M3.5x6 from the NCU shield cover, and then
remove the NCU shield plate.
Fig. 3-91
(5) Disconnect the NCU harness ASSY.
(6) Remove the two cup S M3x6 Taptite screws from the NCU shield cover, and then remove
the NCU PCB ASSY.
Fig. 3-92
Screw pan (S/P washer)
M3.5x6
NCU shield plate
NCU shield cover
NCU shield cover
NCU harness ASSY
NCU PCB ASSY
Taptite, cup S M3x6