Brother MFC-9440CN - Specifications; General Specifications

Confidential
3-82
(4) Remove the cup S M3x8 Taptite screw from the Joint sub cover.
(5) Release the two Hooks to remove the Joint sub cover from the Joint cover ASSY.
Fig. 3-95
(6) Disconnect the three Connectors (CN3, CN7, CN10) from the Main PCB ASSY. (CN3,
CN7: MFC-9440CN/ 9450CDN only)
Fig. 3-96
Taptite, cup S M3x8
Hooks
Joint cover ASSY
Joint sub cover
Main PCB ASSY
CN10
Joint cover ASSY
Speaker holder
CN7
CN3