Brother MFC-9440CN - Page 193

Confidential
3-61
(6) Remove the two bind B M4x12 Taptite screws from the ADF unit.
Fig. 3-57
(7) Open the ADF unit. Push the Ferrite core of the ADF harness through the hole on the
Document scanner unit while lifting up the ADF unit slightly. Then, remove the ADF unit.
Fig. 3-58
Taptite, bind B M4x12
Taptite, bind B M4x12
A
DF unit
Document scanner unit
Document scanner unit
A
DF harness
<Back side>
Ferrite core
Document scanner unit
A
DF unit
Ferrite core