Brother MFC-9440CN - Page 202

Confidential
3-70
(25) Remove the two cup B M3x10 Taptite screws from the Lower document chute.
(26) Remove the cup S M3x6 Taptite screw and FG harness ADF from the Lower document
chute.
Note:
Be careful not to bend the metal frame if the screw is tight.
Fig. 3-74
Taptite, cup B M3x10
Taptite, cup S M3x6
FG harness ADF
Document cover sub ASSY
Taptite, cup B M3x10
Lower document chute