Brother MFC-9440CN - Print Media Specifications

Confidential
3-84
(9) Remove the six cup S M4x8 Taptite screws from the top of the Joint cover ASSY, and
then release the Pin to remove the Joint cover ASSY from the Frame unit.
Fig. 3-99
(10) Turn the Joint cover ASSY upside down.
(11) Remove the Core which is bound with the Speaker harness from the Core holder.
(12) Remove the two bind B M4x12 Taptite screws, and then remove the Speaker holder from
the Joint cover ASSY.
Fig. 3-100
Taptite, cup S M4x8
Taptite, cup S M4x8
Joint cover ASSY
Joint cover ASSY
Taptite, bind B M4x12
Core
Core holder
Speaker holder
Core
Core holder
Speaker holder
Pin
Pin
<Front>
<Bottom>