Brother MFC-9440CN - Copy Specifications

Confidential
3-86
(16) Remove the three bind B M3x8 Taptite screws, and then remove the USB holder and USB
host relay PCB ASSY (MFC-9440CN/ 9450CDN only).
Fig. 3-103
(17) Disconnect the Main USB host harness ASSY from the USB host relay PCB ASSY. (MFC-
9440CN/ 9450CDN only)
Fig. 3-104
USB holder
Taptite, bind B 3x8
Taptite, bind B 3x8
USB host relay PCB ASSY
(MFC-9440CN/ 9450CDN only)
Joint cover ASSY
Main USB host harness ASSY
<Bottom>
USB host relay PCB ASSY