Brother MFC-9440CN - Page 233

Confidential
3-101
(2) Remove the one cup S M3x6 Taptite screw, and then remove the THM/HUM ground plate.
(3) Remove the four cup S M3x6 Taptite screws.
(4) Release the two Hooks to remove the THM/HUM sensor holder ASSY.
Fig. 3-131
Taptite, cup S M3x6
Taptite, cup S M3x6
Hook
Hook
THM/HUM sensor
holder ASSY
Frame unit
<Left side>
THM/HUM ground plate