Brother MFC-9440CN - Page 257

Confidential
3-125
(3) Remove the four cup S M3x6 Taptite screws, and then remove the Engine PCB plate.
Fig. 3-175
Assembling Note:
When assembling the Engine PCB plate, make sure that the section “A” is caught on the Hook
of the Drive frame unit ASSY.
Fig. 3-176
Engine PCB plate
Frame unit
Taptite, cup S M3x6
Taptite, cup S M3x6
<Left side>
Engine PCB plate
Hook
“A”
Drive frame unit ASSY