Brother MFC-9440CN - Page 288

Confidential
3-156
(5) Remove the two bind B M4x10 Taptite screws from the Pinch roller holder cover LT.
(6) Release the four Hooks to remove the Pinch roller holder cover LT from the LT paper tray.
Fig. 3-230
(7) Remove the Pinch roller holder spring from the Rib of the LT paper tray.
Fig. 3-231
Taptite, bind B M4x10
Taptite, bind B M4x10
<Front>
LT paper tray
Hook
Hooks
Hook
Hook
Pinch roller holder cover LT
LT paper tray
<Front>
Pinch roller sub ASSY
Pinch roller holder spring
Rib