Brother MFC640CW - 6.1 Preparation

6-1 Confidential
6.1 PREPARATION
6.1.1 Requirements
Before proceeding to perform any adjustments or update any settings, you need to have the
executables, files, spare parts and supplies (provided by Brother Industries) on hand and set up your
PC.
NOTE: Use a PC/AT-compatible computer running Windows 98SE, Windows Me, Windows 2000
Professional, or Windows XP Home/Professional.
Executables and Files Required for Adjustments and Updating of Settings
BHL2-
Maintenance
Printer driver
BrUsbsn.exe brusbsn.ini FILEDG32.exe
Head/carriage unit
Engine unit
(Section 6.2)
√ √ √ √
Main PCB
(Section 6.3)
√ √ √ √
Ink absorber box
(Section 6.4)
Control panel PCB
(for models with backlights)
(Section 6.5)
INCLINE.PRN PFROLL.PRN EDGE_CHECK.PRN
Head/carriage unit
Engine unit
(Section 6.2)
√ √ √
Main PCB
(Section 6.3)
√ √ √
Ink absorber box
(Section 6.4)
Control panel PCB
(for models with backlights)
(Section 6.5)
NOTE: Executables and files listed above should be saved in an arbitrary folder in your PC
beforehand.
Spare Parts and Supplies Required for Adjustments and Updating of Settings
Recording paper Ink cartridges Dummy cartridges
Head/carriage unit
Engine unit
(Section 6.2)
√ √ √
Main PCB
(Section 6.3)
√ √
Ink absorber box
(Section 6.4)
Control panel PCB
(for models with backlights)
(Section 6.5)