Brother MFC640CW - 3 ] Correct the Positioning Error of the Head;Carriage Unit

6-10 Confidential
[ 3 ] Correct the positioning error of the head/carriage unit
(1) Run "FILEDG32.exe" in the folder created.
The Filedrgs window appears as shown below.
(2) Drag and drop the "INCLINE.PRN" icon onto the BHL2-Maintenance Printer icon in the
Filedrgs window shown above.
The "Incline Adjust" test chart will be printed out.
(3) Check the printed test patterns and select the one that is the least uneven print. Make a note of
that pattern number.
Head Positioning Test Pattern