Brother MFC640CW - 4 ] Update the Paper Feeding Correction Value

6-12 Confidential
[ 4 ] Update the paper feeding correction value
(1) Run "FILEDG32.exe" in the folder created in Section 6.1.1.
The Filedrgs window appears as shown below.
(2) Drag and drop the "PFROLL.PRN" onto the BHL2-Maintenance Printer icon in the Filedrgs
window shown above.
The machine displays the "RECEIVING DATA" on the LCD and prints out "PF adjust check"
patterns (see page 6-14 for a sample printout).
(3) MFC820CW/640CW
Press the 5 and 8 keys on the machine.
DCP340CW
Enter 5 and 8 by using the
and Set keys on the machine.*
(*To enter a numerical code on models having no numerical keypad, press the key several times to
display the numerical code to be entered and then press the Set key. Repeat this operation for each
numerical code.)
The "1.PF 2.EXIT" appears on the LCD.
(4) MFC820CW/640CW
To select the paper feed roller adjustment, press the 1 key.
DCP340CW
To select the paper feed roller adjustment, enter 1 by using the
and Set keys.*
The "PF ADJ NO. +0" appears on the LCD.