Brother MFC640CW - Wsw06

App. 4-8 Confidential
WSW06 (Pause key setting and 2nd dial tone detection)
Selector
No.
Function Setting and Specifications
1
|
3
Pause key setting and 2nd dial
tone detection
No. 1 2 3
0 0 0 : No pause
0 0 1 : 3.5 sec. WAIT
0 1 0 : 7 sec. WAIT
0 1 1 : 10.5 sec. WAIT
1 0 0 : 2.5 sec. WAIT
1 1 0 : 2nd dial tone detection
only in pulse dialing (DP)
system
1 0 1 : 2nd dial tone detection
1 1 1 : both in DP and push-button
(PB) dialing system
4
|
6
Detection of international tone
No. 4 5 6
0 0 0 : 50 ms
0 0 1 : 250 ms
0 1 0 : 500 ms
0 1 1 : 620 ms
1 0 0 : 800 ms
1 0 1 : 1.5 sec.
1 1 0 : 2.0 sec.
1 1 1 : 2.5 sec.
7
No. of 2nd dial tone detection
cycles
0: 1 cycle 1: 2 cycles
8
Allowable instantaneous interrupt
during reception of 2nd dial tone
0: 30 ms 1: 50 ms
NOTE: Selectors 4 through 8 are not applicable in those countries where no dial tone detection is
supported, e.g., U.S.A.