Brother MFC640CW - 10 ] Adjustments;Data in the Memories

9-47 Confidential
[ 10 ] Adjustments/data in the memories
Adjustment/data
setting not
performed
Result Refer to:
Error
codes
Proper
customizing code
(in the EEPROM)
- The machine will not work correctly
at the shipping destination.
- Chapter 8,
Section 8.4.18
- Appendix 3
ID code - The machine will not be able to be
identified by the PC connected to it
when more than one machine is
connected to that PC via USB.
- Chapter 6,
Section 6.3, [ 7 ]
Head property
data (in the
EEPROM)
- The print quality will deteriorate. - Chapter 6,
Section 6.2, [ 1 ]
- Chapter 8,
Section 8.4.16
Correction of head
positioning error
- Any of the following images may
appear on the printout of sent,
copied, or scanned data:
- Chapter 6,
Section 6.2, [ 3 ]
Updating of the
paper feeding
correction value
for the paper feed
roller/paper
ejection roller
- Any of the following images may
appear on the printout of sent,
copied, or scanned data:
- Chapter 6,
Section 6.2, [ 4 ]
- Chapter 8,
Section 8.4.11
Setting of the CIS
scanner area
- The white and black level data will
not be compensated properly.
- The scanning center position will not
be centered.
- Chapter 8,
Section 8.4.10
B3, B4,
B5, B6