Brother MFC640CW - Scanner Cover (Scanner Unit)

5-8 Confidential
5.1.3 Scanner Cover (Scanner Unit)
The scanner cover should be removed together with the ADF & document cover ASSY whose
removal procedure is given in Section 5.1.4.
(1) Open the scanner cover to the left until it locks.
(2) While supporting the scanner cover by hand, unlatch the scanner cover damper from the
scanner cover using an Allen wrench (max. 30 mm x min. 70 mm) as shown below and pull it
off the scanner cover.
NOTE: If using the Allen wrench cannot remove the scanner cover easily, use curved-point
tweezers, taking care not to deform the tip of the tweezers.
Scanner cover
(Scanner unit)
Latch
Latch
Scanner cover
damper
Scanner cover
Allen wrench
Less than 30 mm
More than 70 mm
4 mm
with ADF & document
cover ASSY