8-13 Confidential
[ B ] Printout of firmware switch data
Function
The machine prints out the setting items and contents specified by the firmware switches.
Operating Procedure
(1) MFC820CW/640CW
Press the 1 key twice in the initial stage of the maintenance mode.
DCP340CW
Enter 1 twice by using the
and Set keys.*
(*To enter a numerical code on models having no numerical keypad, press the key several times to
display the numerical code to be entered and then press the Set key. Repeat this operation for each
numerical code.)
The "PRINTING" will appear on the LCD.
(2) The machine prints out the configuration list as shown in the figure below.
(3) Upon completion of printing, the machine returns to the initial stage of the maintenance mode.
To Next Page
Loading...
