Confidential
MFC820CW
MFC640CW
DCP340CW
Appendix 3. Customizing Codes According to
Shipping Destination
This appendix provides instructions on how to set up the customizing codes for the various
preferences exclusively designed for each destination (e.g. language). Those codes are stored in
the memory (EEPROM) mounted on the main PCB. If the main PCB is replaced, therefore, you
need to set up the proper customizing code with the machine in the maintenance mode.
Note: Customizing codes customize firmware for individual models, enabling the common
firmware to be used for various models. They come with the firmware data provided by Brother
Industries.
To Next Page
Loading...
