[00220787] 040000 INF: Win2K
[00220837] 040000 INF: ----- Printer Driver Check Start -----
[00220847] 040000 INF: PARAM MODEL NAME MFC-5840CN
[00220847] 040000 INF: PARAM CMP PRINTER NAME Brother MFC-5840CN USB Printe
*19 Installation Check Detail
[00220847] 040000 INF: PARAM INTERFACE USB *20 Printer Driver Installation Check
[00220847] 040000 INF: PARAM PRINTER ID
[00220847] 040000 INF: PARAM MODE 0
[00220857] 040000 INF: PARAM CMP NAME CHANGE Brother MFC-5840CN USB Printer
[00220857] 040000 INF: PARAM CMP NAME CHANGE Brother MFC-5840CN USB Printer
[00220857] 040000 INF: PARAM CMP NAME CHANGE Brother MFC-5840CN USB Printer
[00220857] 040000 INF: EXIST DRIVER NAME = Brother MFC-5840CN USB Printer
[00220857] 040000 INF: LOCAL PORT NAME = USB006
[00220857] 040000 INF: ----- Printer Driver Check End -----
[00220857] 040000 INF: ----- Scanner Driver Check Start ----- *22 Scanner Driver Installation Check
[00221158] 040000 INF: Initialize() Result = 5 *23 Scanner Error Code:5 = The specified device is not connected ( only USB connection ).
[00221158] 040000 INF: Scanner Install = OK *24 If Scanner Install =OK, Scanner Driver is properly installed.
[00221158] 040000 INF: ----- Scanner Driver Check End -----
[00221158] 040000 INF: ----- FAXTX Driver Check Start -----
[00221158] 040000 INF: PARAM MODEL NAME PC-FAX *25 FAX(Tx) Driver Installation Check
[00221158] 040000 INF: PARAM CMP PRINTER NAME Brother PC-FAX #2
[00221158] 040000 INF: PARAM INTERFACE USB
[00221158] 040000 INF: PARAM PRINTER ID
[00221158] 040000 INF: PARAM MODE 0
[00221158] 040000 INF: EXIST DRIVER NAME = Brother PC-FAX #2 *26 If there is EXIST DRIVER NAME, PC-FAX sending driver is properly installed.
[00221158] 040000 INF: PC-FAX PORT NAME = USB006
[00221158] 040000 INF: ----- FAXTX Driver Check End -----
[00221168] 040000 INF: ----- FAXRX Check Start -----
[00221168] 040000 INF: FAXRX FILE CHECK = OK *27 FAX(Rx) File Check
[00221168] 040000 INF: ----- FAXRX Check End ----- *28 If FAXRX FILE CHECK =OK, FAX receiving file is properly copied.
[00221168] 040000 INF: ----- RSP Check Start -----
[00221168] 040000 INF: RSP FILE CHECK = OK *29 Remote Setup File Check
[00221168] 040000 INF: ----- RSP Check End ----- *30 If RSP FILE CHECK =OK, RSP file is properly copied.
[00221168] 040000 INF: ----- Serial Port Check Start -----
[00221168] 010000 ERR: Open Serial Port Failure *31 Serial Port ( COM Port Driver Check )
[00221168] 010000 ERR: Port Name = \\.\COM5 *32 PC-FAXRX is not available due to serial port failure. .
[00221168] 040000 INF: ----- Serial Port Check End -----
[00221168] 040000 INF: ----- Enumerate Host Controllers Check Start -----
[00221288] 040000 INF: USB Host Controler: \\.\HCD0 = Intel 82371AB/EB PCI to USB Universal Host Controlle
*33 Communication Check
*34 No device is connected to USB or no device is recognized because of HUB.
[00221288] 040000 INF: USB Hub Information: [Port1] NoDeviceConnected = NoDeviceConnected Communication check is not attempted because the connection is not recognizable.
[00221288] 040000 INF: USB Hub Information: [Port2] NoDeviceConnected = NoDeviceConnected
[00221288] 040000 INF: ----- Enumerate Host Controllers Check End -----
19
20
21
22
23
24
25
26
2728
29
30
31
32
33
34
USB Communication Error
Confidential
To Next Page
Loading...
