II-
7
2.2.3 Key, LED PCB (SB PCB)
This is the PCB equipped with ON/OFF button, FEED button, CUT button, cover open sensor
and LED lamp.
2.2.4 Cutter Home Position Sensor
This sensor detects existence of the cutter at its home position.
2.2.5 Media Feed Motor (Tape Feed Motor)
The media feed motor supplies the drive power to feed media. This motor is step motor of
which drive voltage is V
H
(25V).
2.2.6 Full Cutter Motor
The cutter motor supplied the drive power to cut media. This motor is a DC motor of which
drive voltage is V
H
(25V).
2.2.7 Thermal Head
Thermal head is thick film and drive built-in type thermal head, which consists of1296 dots by
one row / 300dpi. The drive voltage is V
H
(25V).
To Next Page
Loading...
Need help?
General
