Brother P-Touch QL-1050 - 7 ] Disassembling the Panel Cover

III- 19
[ 7 ] Disassembling the Panel Cover
(1) Remove the two screws and remove the SB PCB ASSY and cover sensor arm R from the
panel cover.
Fig. 3.1-25 Disassembling the Panel Cover (1)
(2) Remove the one screw and remove the LED guide. Remove the power button and feed
button.
Fig. 3.1-26 Disassembling the Panel Cover (2)
Panel cover
Power button
Cover sensor arm R
LED guide
Feed button
Screw
SB PCB ASSY
Screw
Panel cover
Screw