III- 26
3.5 REASSEMBLING PROCEDURE
[ 1 ] Reassembling the Mecha ASSY
Note: Be careful not to cut your finger with the edge of the parts.
(1) Assemble the tape feed motor ASSY and FG harness ASSY onto the chassis R sub ASSY
with the two screws.
Note: Pay attention to the direction of the tape feed motor ASSY.
Fig. 3.2-1 Reassembling the Mecha ASSY (1)
(2) Assemble the chassis R sub ASSY onto the sub plate with the two screws.
Fig. 3.2-2 Reassembling the Mecha ASSY (2)
Tape feed motor ASSY
Chassis R sub ASSY
Screw
FG harness ASSY
Screw
Screws
Chassis R sub ASSY
Sub plate
To Next Page
Loading...
