III- 37
[ 4 ] Installing the Front Side Cover, Panel Cover and Front Cover
(1) Align the pins of the panel cover and front side cover with the holes on the cutter unit
ASSY, then assemble each of them with the one screw.
Fig. 3.2-19 Installing the Front Side Cover, Panel Cover and Front Cover (1)
(2) Put the harness through the hole of the under cover.
Fig. 3.2-20 Installing the Front Side Cover, Panel Cover and Front Cover (2)
Cutter unit ASSY
Front side cover
Screw
Screw
Panel cover
Under cover
SB PCB harness
Rib
Pass the harness under
the release lever R.
SB PCB
Under cover
Mecha ASSY
Panel cover
Pins
Hole
Hook
Hook
To Next Page
Loading...
