III- 9
[ 3 ] Removing the Upper Cover ASSY
(1) Turn the machine upside down.
(2) Remove the four screws and remove the lower plate.
Fig. 3.1-7 Removing the Upper Cover ASSY (1)
(3) Disconnect all connectors from the main PCB.
Fig. 3.1-8 Removing the Upper Cover ASSY (2)
Screws
Lower plate
Screw
Main PCB
Fan motor
Cutter motor ASSY
Cover open sensor
Head ASSY Tape sensor PCB ASSY
SB PCB ASSY
Cutter home position sensor
DC8V power PCB ASSY
Tape feed motor ASSY
Screw
To Next Page
Loading...
