Brother P-Touch QL-1050 - How to Use the P-touch Address Book

III- 8
(2) Remove the two retaining rings and remove the two platen shaft bearings, platen gear and
platen ASSY.
Fig. 3.1-6 Disassembling the Top Cover ASSY (2)
Top cover
Platen shaft bearing
Retaining ring
Platen ASSY
Platen shaft bearing
Platen gear
Retaining ring
Platen ASSY Top cover
Retaining ring
Platen shaft bearing
Platen gear
Platen ASSY
* Remove the platen shaft bearing on the left and right sides.
Platen shaft bearing
Retaining ring
* Remove the left end of the platen ASSY from the top cover.