III- 2
3.2 TIGHTNING TORQUE LISTS
Location Screw type Q’ty
Tightening torque
N•cm
Chassis L sub ASSY Screw, bind 2.6 x 4 2 0.392 ± 0.098
Chassis R sub ASSY Screw, bind 2.6 x 4 2 0.392 ± 0.098
Head ASSY Screw, bind 3 x 3 2 0.588 ± 0.098
Tape feed motor ASSY
FG harness ASSY
Screw, bind 3 x 4 1
0.588 ± 0.098
Tape feed motor ASSY Screw, bind 3 x 4 1 0.588 ± 0.098
Cutter unit ASSY Screw, bind 3 x 4 2 0.588 ± 0.098
Side panel L Taptite, bind B 2.6 x 8 2 0.343 ± 0.049
Side panel R Taptite, bind B 2.6 x 8 2 0.343 ± 0.049
Front cover ASSY Taptite, bind B 3 x 8 2 0.55 ± 0.049
Insert guide Taptite, bind B 2.6 x 8 1 0.343 ± 0.049
Upper cover ASSY Taptite, bind B 2.6 x 8 3 0.343 ± 0.049
Mecha ASSY Taptite, bind B 2.6 x 8 2 0.343 ± 0.049
LED guide Taptite, bind B 2.6 x 8 1 0.343 ± 0.049
SB PCB ASSY Taptite, bind B 2.6 x 8 2 0.343 ± 0.049
Main PCB ASSY Taptite, bind B 2.6 x 8 1 0.343 ± 0.049
Ground spring plate Taptite, bind B 2.6 x 8 1 0.343 ± 0.049
Main PCB ASSY
FG harness ASSY
Taptite, bind B 2.6 x 8 1
0.343 ± 0.049
Power supply ASSY Taptite, bind B 2.6 x 8 2 0.343 ± 0.049
DC8V power PCB ASSY Taptite, bind B 2.6 x 8 1 0.343 ± 0.049
Lower plate ASSY Taptite, bind B 2.6 x 8 4 0.343 ± 0.049
Upper cover ASSY Screw, bind 2.6 x 4 2 0.392 ± 0.098
Panel cover Screw, bind 2.6 x 4 1 0.392 ± 0.098
Front side cover Screw, bind 2.6 x 4 1 0.392 ± 0.098
To Next Page
Loading...
