EasyManua.ls Logo

Brother P-Touch QL-1050 - Media Type Sensor Circuit, Media Position Detect Sensor Circuit and Cover Open Sensor Circuit

Brother P-Touch QL-1050
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
II-
13
2.3.5 Media Type Sensor Circuit, Media Position Detect Sensor Circuit and Cover Open
Sensor Circuit
(1) Media type sensor circuit
The sensor circuit consists of media sensor with six switch systems (CAS1 through
CAS6).
Loading a tape cassette, some of six switches turn on and the others retain off
according to the configuration of its’ ID code apertures. Clogged ID apertures turn on
the corresponding sensor switches.
As shown next page, the CPU identifies media type and size from the status of each
sensor switch.
Fig. 2.3-5 shows the media type sensor circuit.
Fig. 2.3-5 Media Type Sensor Circuit

Table of Contents

Other manuals for Brother P-Touch QL-1050

Related product manuals