III- 33
[ 2 ] Installing the Panel Cover
(1) Assemble the LED guide onto the panel cover with the one screw.
(2) Assemble the power button and feed button onto the panel cover.
Fig. 3.2-11 Installing the Panel Cover (1)
(3) Assemble the SB PCB ASSY and cover sensor arm R onto the panel cover and secure
the SB PCB ASSY onto the panel cover with the two screws.
Note: Make sure to put the harness of the SB PCB ASSY through the hook of the panel
cover.
Fig. 3.2-12 Installing the Panel Cover (2)
Power button
Screw
LED guide
Feed button
Panel cover
Screw
Panel cover
Cover sensor arm R
SB PCB ASSY
Screw
SB PCB ASSY
Panel cover
Hook
To Next Page
Loading...
