PREFACE
This publication is a service manual covering the specifications, theory of operation,
disassembly/reassembly procedure, and troubleshooting the Brother QL-1050. It is intended for
service personnel and other concerned persons to accurately and quickly provide after-sale service
for our QL-1050.
To perform appropriate maintenance so that the machine is always in best condition for the
customer, the service personnel must adequately understand and apply this manual.
This manual is made up of four chapters and appendices.
CHAPTER I SPECIFICATIONS
CHAPTER II THEORY OF OPERATION
CHAPTER III DISASSEMBLY AND REASSEMBLY
CHAPTER IV TROUBLESHOOTING AND ERROR MESSAGE
APPENDIX 1. MAINTENANCE SOFTWARE OPERATION
© Copyright Brother 2006
All rights reserved.
No part of this publication may be reproduced in any
form or by any means without permission in writing
from the publisher.
Specifications are subject to change without notice.
To Next Page
Loading...
Need help?
General
