T401S Indicator User Instructions 17
3.3 Counting application
b If the sample size was not large enough or if the weight was unstable,
Abort is briefly displayed and the display returns to gross weighing
mode. Repeat steps 3 through 5 using a larger sample size.
5. Place the parts on the scale to be counted. To accumulate the count and
number of transactions, press PRINT while in count mode.
6. If enabled, press and hold PRINT for three seconds to print and/or clear the
active count total. These functions are enabled or disabled in a password
protected menu.
Minimum sample weight is the gross zero band value. The initial sample count is 5
pieces. The maximum number of pieces that can be sampled is 100,000.
To Next Page
Loading...