Introduction
SMART MATRIX MTC - i -
Introduction
Congratulations for choosing a BTSR product.
With our SMART
MATRIX MTC yarn control system, you got an innovative, unique solution, which offers you
multiple advantages concerning the quality control of your production.
SMART
MATRIX MTC has been designed to obtain an accurate measurement of yarn meters wound on
doubling machines, winding machines, etc. This system also offers the possibility to control the yarn
breakage/missing conditions (“BROKE DETECTION on/off function”).
SMART
MATRIX MTC, combined with IS3W/MTC tension sensor, represents a complete and effective
machine control system.
The SMART
MATRIX MTC system has been developed by BTSR International S.p.A. to make easier and
optimize:
• The sensor programming,
• The system configuration,
• The production monitoring.
The availability of a “User Friendly” graphic interface allows you to quickly and intuitively program all the
operating parameters of IS3W/MTC sensors; in addition, it provides a real time monitoring of sensors
behavior and production efficiency.
Manual Objectives
This manual has been written to provide the users of SMART MATRIX MTC system with the essential
information required to:
• Correctly install and connect the various system components (SMART MATRIX terminal, SM-DIN
MTC Boards, IS3W sensors, etc.).
• Configure the system according to the application needs and setup the various operation
parameters.
• Detect and interpret the error signaling and system efficiency data.
• Use the diagnostics maintenance and utility functions offered by the system (system component
test, firmware upgrading, etc.).
To Next Page
Loading...
