SnackFix 2016-08 33
On all rotating and circulating components there is a risk of en-
tanglement and crushing.
Wear tight clothes and a hair net.
Do not grasp between rotating components!
There is a risk of entanglement and crushing on Conveyor belts and
rollers.
Do not grasp under the transport belt!
Component surfaces can heat up greatly during operation. Skin
contact with hot surfaces causes serious burns.
Do not touch hot surfaces.
Always wear heat-resistant protective clothing/gear and protec-
tive gloves when working near hot surfaces.
Before starting any work, make sure that all surfaces have
cooled down to the ambient temperature.
Only trained personell should make any changes.
The control cabinets are labeled with this symbol.
No direct water jet into the hood!
To Next Page
Loading...
