Installation and First Start-Up
58 SnackFix 2016-08
6 Installation and First Start-Up
6.1 Safety
Installation and first start-up are exclusively done by
Bepex specialists and is not described in the operating
instructions.
Risk of injury due to improper installation and first start-up!
Improper installation and first start-up can lead to severe injuries
and property damage. Therefore, these works are done by Bepex
specialists.
Never perform installation or first start-up unauthorized.
Consult the manufacturer also in case of later relocations.
6.2 Requirements at the Installation Site
The following conditions must be fulfilled:
The installation site is flat and plane.
It is guaranteed that the machine stands stable.
The machine is easily accessible from all directions.
The installation site is sufficiently illuminated.
Energy supply is available.
Emergency exits and life-saving equipment are freely accessible
The floor cover must fulfill the following conditions:
The surface quality must prevent spilled material from seeping in.
The surface must be easy clean.
The surface must be suitable for wet cleaning.
The surface must be skid proof.
To Next Page
Loading...
